Chamber furnace with protective atmosphere СНЗ-2,5.5.2,5/12,5 И2 Гк with fan
№ | Specifications |
СНЗ-2,5.5.2,5/12,5 И2 Гк
|
|||
---|---|---|---|---|---|
1 | Rated power, kW |
8 ±3
|
|||
2
|
Power supply | 3×380 V, 50 Hz | |||
3
|
Maximum temperature in the working space, ºС |
1250
|
|||
4 | Range of automatic temperature control, ºС | 40...1250 | |||
5 | Dimensions of working space, length × width × height, mm | 250 × 500 × 250 | |||
6 | The uneven temperature distribution into the furnace chamber in the steady thermal conditions, without cages, ºС | ± 5 | |||
7 | Stability of maintain the temperature at steady thermal conditions, without cages, °C, not less than | ± 3 | |||
8 | Type of temperature regulator / Thermocouple type | ТРП-09-ТП / ТПП | |||
9 | Atmosphere in the working space | The inert gas | |||
10 | Maximum weight of cages, kg | 40 |
Chamber electric furnace СНЗ-2,5.5.2,5/12,5 И2 Гк with a protective atmosphere. The electric furnace has a gas-tight enclosure. As protective atmosphere commonly used argon, or nitrogen (in flasks). There shall be no oven aggressive or conductive gas can damage the elements of the oven. In the case of such a gas must be installed in a retort furnace from a suitable material. Electric furnace system is equipped with automatic temperature control on the basis of solid-state non-contact relays and programmable digital thermostat with interface and software for PC connection and the ability to record the process. The furnace refractory lined with modern energy-saving materials. Under the furnace is made of solid refractory to withstand a lot cages. To improve the uniformity of temperature distribution on the furnace working space in the ceiling mounted ventilation fan with a diffuser of heat-resistant steel.
Write a review
Your Name:Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below: