. .png)
. 
Installation of water softening 1 m³/h
| № | Specifications |
UV - 1 m³ / h
|
|||
|---|---|---|---|---|---|
| 1 | Number of attendants * |
1
|
|||
|
2
|
The volume of of cation, kg, up to | 500 | |||
| 3 | Consumption of salt to 1 regeneration, kg | 60 | |||
| 4 | Overall dimensions of the filter, mm (diameter × height) |
2500×700×2500
|
|||
| 5 | Maximum allowable pressure, MPa | 0,8 | |||
| 6 | Maximum productivity of the water, m³/h |
5,0
|
|||
| 7 | Diameter of connective piping, mm | 33 | |||
| 8 | Duration of the regeneration period, minutes | 120 | |||
Note. * Continuous maintenance is required.
Single-stage ion-exchange water softening systems UV-1, capacity of 1 m³ / h consists of a plastic columns filled with ion exchange sploy, Salt dissolver with rotameter flow of water and salt solution, a set of valves and piping frame. Includes posport instruction manual. Installation of is placed on a flat area, preferably near the wall. Single-stage ion-exchange water softening systems UV-1, capacity of 1 m³ / h consists of a plastic columns filled with ion exchange sploy, Salt dissolver with rotameter flow of water and salt solution, a set of valves and piping frame. Includes posport instruction manual. Installation is placed on a flat area, preferably near the wall. After this is done the connection inlet and outlet pipes of water and wash water drain pipe to the drain. To limit the flow of water through the plant according to its performance on the water inlet pipe is desirable to put the water meter. Electrical components in the installation are missing. If necessary, prepared to provide additional information.
Write a review
Your Name:Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below: