Installations "Пламя-2" for water disinfection
Block installation electrolysis of water disinfection with sodium hypochlorite - "Flame-2"
Preparation antiseptic agent (sodium hypochlorite solution) by the electrolysis of sodium chloride solution. Sodium hypochlorite solution is used for disinfection of drinking water, wastewater, process water and swimming pools. Sodium hypochlorite - a strong oxidizing agent, for germicidal effectiveness and impact on the quality of treated water corresponds to the action of liquid chlorine bleach or other chlorine-containing reagents.
The unit can be used for the chlorination of drinking water, disinfection of water supply systems to water treatment plants for wastewater disinfection, including biologically treated. Operating conditions must comply with GOST 15150-69, climatic modification UHL, category 4 rooms (temperature from + 1 ° C to + 35 ° C, relative humidity 80% at + 25 ° C).
Design and operation of the plant:
The plant operates on the principle of electrolysis of sodium chloride solution in the single cell. Formed in the electrolysis process, sodium hypochlorite is continuously dosed into the water to be treated.
The installation consists of:
- Node cooking salt solution, which comprises tanks made of PVC or stainless steel and the flow of the salt solution and water.
- Electrolytic cell composed of an electrolysis chamber of cylindrical shape and placed it in the electrode stack.
- PSU, Kothari is a rectifier unit equipped with a voltmeter and an ammeter.
- Separator. It is established by electrolysis and for separating gas generated by electrolysis of sodium hypochlorite and remove them to the atmosphere.
Electrolysis system allows the disinfection of drinking water and waste water disinfection with maximum quality.
The most effective method of water disinfection - disinfection with sodium hypochlorite. Sodium hypochlorite is produced in an electrolytic cell enables disinfection of water is also effective, as it makes liquid chlorine, but unlike chlorine hypochlorite has no toxic properties, when applied correctly.
Acquire ready sodium hypochlorite is not appropriate for many reasons. Most advantageously prepared sodium hypochlorite directly on the place of consumption via the electrolysis unit, which can significantly reduce costs for water disinfection.
Additionally, hypochlorite produced on-site using not only advantageous, but also safer, because during storage of sodium hypochlorite decomposes with the evolution of chlorine and oxygen.
The resulting sodium hypochlorite is substantially non-toxic and has a high efficiency. Therefore, disinfection of water is in accordance with the required standards of hygiene and water treatment requirements.
Using in water treatment and sewage treatment plants modular electrolysis plants, water disinfection "Flame-2", you decide problemmu disinfection once and for all.