Chamber furnace СНО-6.6.6/4,5 И2 with fan
№ | Specifications |
СНО-6.6.6/4,5 И2
|
|||
---|---|---|---|---|---|
1 | Rated power, kW |
10 ±3
|
|||
2
|
Power supply | 3×380 V, 50 Hz | |||
3
|
Maximum temperature in the working space, ºС |
400
|
|||
4 | Range of automatic temperature control, ºС | 60...400 | |||
5 | Dimensions of working space, length × width × height, mm | 600 × 600 × 600 | |||
6 | The uneven distribution of temperature at the chamber, in constant thermal conditions, without cages, ºС |
± 5
|
|||
7 | Atmosphere in the working space | Air | |||
8 | The stability of the temperature control in the steady thermal conditions, without cages, ºС | ± 3 | |||
9 | Type of temperature regulator / thermocouple type | ТРП-08-ТП / ТХК | |||
10 | Heaters | Heating elements | |||
11 | Material of heater | Fechral | |||
12 | The presence of perforated shelves, pcs | 2 |
Chamber electric furnace dryer СНО-6.6.6/4.5 И2 with fan made of stainless steel and equipped with automatic temperature control system based on microprocessor controller and solid-state non-contact relay, lined with fiber insulating materials and is designed for industrial use. There is supply and exhaust air vents with a slide valve. The thermostat allows you to set the operating temperature, time to treatment and time spent on the operation. The circulation fan is installed at the upper side of the furnace and circulates the air in the chamber in a vertical plane.
Write a review
Your Name:Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below: