Drying chamber СНО-15.15.18/4 И1 with fan
|1||Rated power, kW||
|Power supply||3×380 V, 50 Hz|
|Maximum temperature in the working space, ºС||
|4||Range of automatic temperature control, ºС||50…400|
|5||Dimensions of working space, length × width × height, mm||1500 × 1500 × 1800|
|6||The stability of the temperature control in the steady thermal conditions, without cages, ºС||± 3|
The uneven distribution of temperature at the chamber, in constant thermal conditions, without cages, ºС
|8||The presence of shelves, pcs||-|
The drying chamber СНО-15.15.18/4 И1 is equipped with a fan with automatic temperature control by microprocessor temperature controller (set operating temperature, time to treatment and time spent on the mode) and solid-state non-contact relay. Remote control operation of the heater is mounted on the left side of the furnace. The furnace lined with modern energy-saving thermal insulation materials and is designed for industrial use. The circulation fan is installed at the upper side of the furnace. To circulate in a vertical plane. The oven chamber is made of black steel, covered with heat-resistant paint. Single-hand doors open on the left - right. The medium in the working space of the furnace - air and heaters - heating elements in stainless shell. Are supply and exhaust ventilation openings with dampers.
Write a reviewYour Name:
Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below: