Drying oven СНО-6.5.9/4 И1 with fan
№ |
Specifications
|
СНО-6.5.9/4 И1
|
|||
---|---|---|---|---|---|
1 | Rated power, kW |
7 ±1
|
|||
2
|
Power supply | 220 V, 50 Hz | |||
3
|
Maximum temperature in the working space, ºС |
400
|
|||
4 | Range of automatic temperature control, ºС | 50…400 | |||
5 | Dimensions of working space, length × width × height, mm | 600 × 500 × 900 | |||
6 | The stability of the temperature control in the steady thermal conditions, without cages, ºС | ± 3 | |||
7 | The uneven distribution of temperature at the chamber, in constant thermal conditions, without cages, ºС | ± 5 | |||
8 | Type of temperature regulator / thermocouple type | ТРП-09-ТП / ТХК | |||
9 | Heaters | Heating elements | |||
10 | Atmosphere in the working space | Air |
Drying oven СНО-6.5.9/4 И1 with fan equipped with automatic temperature control on the basis of solid-state relays and contactless microprocessor thermostat sets the temperature, time, set the temperature and time of exposure cages at the same temperature (up to 12 steps "heating - shelf"). There is access to a computer with the provided interface and software for registration of heat treatment processes. To connect an external recorder next to the working thermocouple is a hole Ø11mm, which can be placed on a thermocouple recorder. Heaters (heating elements in stainless shell) placed in the grooves of the bottom and side walls. The furnace lined with modern energy-saving materials. At the end of the oven with a fan to circulate the air in the chamber in the horizontal plane. There is supply and exhaust (with the flap) the vents. The working chamber is made of steel and covered with a black heat-resistant paint. The camera has 8 shelves (20 mm rim) of black metal covered with heat-resistant paint. Shelf load up to 10 kg.
Write a review
Your Name:Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below: