Drying oven СНОА-8.8.3/3 И1 with fan
|1||Rated power, kW||
|Power supply||3×380 V+N, 50 Hz|
|Maximum temperature in the working space, ºС||
|4||Range of automatic temperature control, ºС||40…300|
|5||Operating temperature (± 5 ºС)||80, 160, 200|
|6||Dimensions of working space, length × width × height, mm||3×(800×800×300)|
|7||The stability of the temperature control in the steady thermal conditions, without cages, ºС||± 3|
|8||The uneven temperature distribution over the chamber volume in a steady thermal state, ºС||± 5|
|9||Mark temperature regulator / thermocouple type||ТРП-08-ТП (by default) / ТХК|
|11||Atmosphere in the working space||Air|
Note. * The height of the furnace depends on the length of the legs.
Combined drying oven СНОА-8.8.3/3 И1 with fans is composed of three independent furnaces located in the same housing one above the other. Each furnace is equipped with automatic temperature control system based on digital temperature controller and solid-state non-contact relay, lined fibrous insulation materials. Ovens door open on the left - right. The consoles are installed recorders such as "Disk 250" for recording parameters of each furnace on the paper chart. Working chamber of furnaces are made of black steel, covered with heat-resistant paint. There are input and output (with vanes) of the opening for removing the products of drying.
Each cell has a fan to circulate the air in a horizontal plane, and a shelf, stand your batch weight of 50 kg.
Write a reviewYour Name:
Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below: