Hardening furnace СНО-4.6.4/12,5
№ | Specifications |
СНО-4.6.4/12,5
|
|||
---|---|---|---|---|---|
1 | Rated power, kW |
20 ±2
|
|||
2
|
Power supply | 3×380 V, 50 Hz | |||
3
|
Maximum temperature in the working space, ºС |
1250
|
|||
4 | Range of automatic temperature control, ºС | 40...1250 | |||
5 | Dimensions of working space, length × width × height, mm | 400 × 600 × 400 | |||
6 | Atmosphere in the working space | Air | |||
7 | Stability of temperature control in the steady thermal conditions, without cages, ºС | ± 3 |
High temperature electric furnace СНО-4.6.4 /12.5 is equipped with automatic temperature control on the basis of solid-state relays and contactless microprocessor thermostat sets the temperature, time to treatment and stay in the mode (up to 12 steps "heating-shelf"). Provides access to the computer using the supplied interface and software. The control panel is located on the left side of the furnace. Heaters are placed on the tubes in the recesses of the side and end walls of the furnace. In no hearth heaters on request. The oven door on the hinges open by hand to the left - right. The furnace lining modern energy-saving materials. The furnace has priplivniy and exhaust ventilation openings with stoppers to remove any gaseous emissions during the heat treatment.
Write a review
Your Name:Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below: