Annealing furnace СНО-6.10.4/7,5 with fan
|1||Rated power, kW||
|Power supply||3×380 V+N, 50 Hz|
|Maximum temperature in the working space, ºС||
|4||Range of automatic temperature control, ºС||40...750|
|5||Dimensions of working space, length × width × height, mm||600 × 1000 × 400|
|6||Overall dimensions (width × height × length)
The height from the floor to the furnace hearth, mm
1550 × 1850 × 2150
|7||Atmosphere in the working space||Air|
|8||Stability of temperature control in the steady thermal conditions, without cages, ºС||± 3|
The uneven distribution of temperature at the chamber volume, in constant thermal conditions, without cages, ºС
High electric furnace with fan is equipped with automatic temperature control system based on microprocessor thermostat TRP-08-TP (by default) and contactless solid-state relays. The thermostat allows you to set the temperature, time to treatment and time spent on the operation. The control panel is placed on the left side of the furnace. Heaters made from superfehrali and mounted on the tubes in the slots of the side and the end walls of the furnace and in the hearth. Hearth heaters covered with ceramic tiles. The furnace design provides automatic security. Multi-layer lining of the oven is made of modern fibrous and microporous materials. Selected materials and construction of the furnace provides energy-saving mode. Hinged door opens to the left - right. In the furnace there are air supply and exhaust (with stopper) vents gas to remove any precipitates (e.g., burning oil) and for controlling the rate of cooling cages (if necessary).
The oven installed under the arch of the fan impeller with a diffuser of heat-resistant steel to reduce unevenness of the temperature distribution over the volume of the oven chamber.
Write a reviewYour Name:
Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below: