Chamber furnace СНО-7.10.5/10
№ | Specifications |
СНО-7.10.5/10
|
|||
---|---|---|---|---|---|
1 | Rated power, kW |
32 ±2
|
|||
2
|
Power supply | 3×380 V, 50 Hz | |||
3
|
Maximum temperature in the working space, ºС |
1000
|
|||
4 | Range of automatic temperature control, ºС | 40...1000 | |||
5 | Dimensions of working space, length × width × height, mm | 700 × 1000 × 500 | |||
6 | Welded heat resistant steel pallet, 10 mm thick,with thermal compensation cuts and edges of rigidity | + | |||
7 | Atmosphere in the working space | Air | |||
8 | Stability of temperature control in the steady thermal conditions, without cages, ºС | ± 3 |
High-temperature chamber electric furnace СНО-7.10.5/10 with heat-resistant tray and a folding table. The electric system is equipped with automatic temperature control using contactless relay and solid-state digital temperature controller, allowing you to set the temperature, time to treatment and time spent on the operation. The control panel is placed on the left side of the furnace. The lining of the furnace chamber is made of modern fiber and microporous materials, and the hearth - from solid refractory. The heaters are made of fehrali and placed on the pipes in the grooves of the side and end walls of the chamber in the hearth. Hearth heaters covered with ceramic tiles. Doors with counterweights raised manually. The load on the folding table not more than 500 kg. The furnace has a supply and exhaust ventilation openings with stoppers to remove any gaseous emissions during the heat treatment.
Write a review
Your Name:Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below: