Laboratory furnace СНО-2,5.5.2,5/12,5 И1
| № | Specifications |
СНО-2,5.5.2,5/12,5 И1
|
|||
|---|---|---|---|---|---|
| И1 - outdoor heaters inside the workspace | |||||
| 1 | Rated power, kW |
6
|
|||
|
2
|
Power supply | 220 V, 50 Hz | |||
|
3
|
Maximum temperature in the working space, ºС |
1250
|
|||
| 4 | Range of automatic temperature control, ºС | 40...1250 | |||
| 5 | Dimensions of working space, length × width × height, mm | 250 × 500 × 250 | |||
| 6 | Overall dimensions, length × width × heiht, mm, no more | 650 × 850 × 650 | |||
| 7 | Atmosphere in the working space | Air | |||
| 8 | The stability of the temperature control in the steady thermal conditions, without cages, ºС | ± 2 | |||
| 9 | Type of temperature regulator / thermocouple type | ТРП-08-ТП / ТПП | |||
| 10 | Weight, kg, not more | 80 | |||
Electric laboratory furnace СНО-2,5.5.2,5/12.5 И1 is equipped with an automatic temperature control system based on the triac, thermocouple type ТПП, and microprocessor temperature regulator ТРП-08-ТП, which allows you to set the temperature, temperature set time and cages holding time at this temperature. The remote control operation of a furnace built in the lower part of the furnace body. Heaters (spiral of superfehrali) placed on the tubes in the recesses of the side walls of the furnace chamber. Oven chamber is made of microporous and fibrous refractory and insulating materials. In hearth chambers placed ceramic tiles. The overlapping of the furnace chamber and the doors have ventilation holes with plugs.
Write a review
Your Name:Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below:
.
. 

