Muffle furnace СНО-6.7.5/8 И1
№ | Specifications |
СНОЛ-6.7.5/8 И1
|
|||
---|---|---|---|---|---|
И1 - open heating elements inside the workspace | |||||
1 | Rated power, kW |
25
|
|||
2
|
Power supply | 3×380 V, 50 Hz | |||
3
|
Maximum temperature in the working space, ºС |
800
|
|||
4 | Range of automatic temperature control, ºС | 100…800 | |||
5 | Overall dimensions, (length × width × height), mm | 1200 × 1200 × 100 | |||
6 | Dimensions of working space, length × width × height, mm | 600 × 700 × 500 | |||
7 | Atmosphere in the working space | Air | |||
8 | The stability of the temperature control in the steady thermal conditions, without cages, ºС | ± 3 | |||
9 | The uneven distribution of temperature at the chamber, in a constant mode, ºС, not worse | ± 5 | |||
10 | Material of spiral heaters | Х23Ю5 | |||
11 | Weight, kg, not more | 300 |
Electric furnace СНО-6.7.5/8 И1 in the laboratory performance is designed for heat treatment of of various materials in stationary conditions. Heaters are placed in the grooves on the tubes side and end walls and in the hearth (chamber material - microporous materials, open spirals). Electric furnace is made in the desktop version, equipped with an automatic temperature control system based on a microprocessor controller and a solid-state non-contact switch. The control panel is located on the left side of the furnace.
Write a review
Your Name:Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below: