ОТПРАВИТЬ ЗАПРОС

Заполните форму и мы свяжемся с Вами!

Enter first 5 characters of word “salutation”
Close
Muffle furnace СНО-1,6.2,5.1/11 И2 Muffle furnace СНО-1,6.2,5.1/11 И2
Muffle furnace СНО-1,6.2,5.1/11 И2
?

Бренд, торговая марка или название предприятия-производителя, под знаком которого изготовлен товар. «Собственное производство» означает, что товар изготовлен продавцом либо не сертифицирован.

BrandBortek
?

Наличие гарантийных обязательств производителем, подтверждает отсутствие в изделии дефектов и принимает на себя обязатель­ства по обеспечению бесплатного ремонта и замены вышедших из строя элементов, без вины пользователя, на протяжении всего срока гарантии. В результате невозможности ремонта изделия, полная его замена без потери технических характеристик.

Product Code: 12
?

Маркировка — нанесение условных знаков, букв, цифр, графических знаков или надписей на объект, с целью его дальнейшей идентификации (узнавания), указания его свойств и характеристик.

Brand: Лабораторные СНО до 1360°C
?

Страна в которой находится производство продукции.

Country of origin: Ukraine

Muffle furnace СНО-1,6.2,5.1/11 И2

Specifications
СНО-1,6.2,5.1/11 И2
И2 - heaters covered with ceramic tiles inside the workspace
1 Rated power, kW
2,3
2
Power supply 220 V, 50 Hz
3
Maximum temperature in the working space, ºС
1100
4 Range of automatic temperature control, ºС 40...1100
5 Dimensions of working space, length × width × height, mm 160 × 250 × 100
6 Overall dimensions, length × width × heiht, mm, no more 470 × 600 × 480
7 Atmosphere in the working space Air
8 The stability of the temperature control in the steady thermal conditions, without cages, ºС ± 2
9 Type of temperature regulator / thermocouple type ТРП-08-ТП / ТХА 


The electric laboratory furnace СНО-1,6.2,5.1/11 И2 is equipped with an automatic temperature control system based on contactless solid-state relays and microprocessor thermostat, allowing to set the temperature, set temperature, time and the dwell time at this temperature cages. Heaters superfehrali of tubes placed in grooves on the side walls and covered with ceramic tiles. On the hearth chamber also has ceramic tile. furnace chamber is made of microporous and advanced fiber materials. The oven door and the ceiling has ventilation holes with plugs for setting the reference thermocouple and remove any discharge gas during the heat treatment. By agreement with the Customer oven settings can be changed.

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below:



ТОВ "Бортек" © 2023