Laboratory electric furnace СНО-1,6.2,5.1/11 И1
| № | Specifications |
СНО-1,6.2,5.1/11 И1
|
|||
|---|---|---|---|---|---|
| И1 - open heaters inside the work chamber | |||||
| 1 | Rated power, kW |
2,3
|
|||
|
2
|
Power supply | 220 V, 50 Hz | |||
|
3
|
Maximum temperature in the working space, ºС |
1100
|
|||
| 4 | Range of automatic temperature control, ºС | 40...1100 | |||
| 5 | Dimensions of working space, length × width × height, mm | 160 × 250 × 100 | |||
| 6 | Overall dimensions, length × width × heiht, mm, no more | 470 × 600 × 480 | |||
| 7 | Atmosphere in the working space | Air | |||
| 8 | The stability of the temperature control in the steady thermal conditions, without cages, ºС | ± 2 | |||
| 9 | Type of temperature regulator / thermocouple type | ТРП-08-ТП /ТХА | |||
Laboratory oven СНО-1,6.2,5.1/11 И1 is equipped with an automatic temperature control system based on solid-state relay with contactless microprocessor-based thermocouple and temperature controller ТРП-09-ТП, which allows to set the temperature, set temperature, time and dwell time cages at the same temperature (up to 12 steps "warming-delay"). Heaters of superfehrali placed on the tubes in the grooves in the side walls and hearth. Heaters are open on the side walls of the furnace. In the hearth chamber heaters covered with ceramic tiles. furnace chamber is made of microporous and advanced fiber materials. The oven door and ceiling mounted ventilation holes with plugs to remove the gas discharge during the reference thermocouple and heat treatment plant.
Write a review
Your Name:Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below:
.
. 

