Pit electric furnace СШОЛ-1,2.4/12,5
| № | Specifications |
СШОЛ-1,2.4/12,5
|
|||
|---|---|---|---|---|---|
| 1 | Rated power, kW |
2,5 ±0,5
|
|||
|
2
|
Power supply | 220 W, 50 Hz | |||
|
3
|
Maximum temperature in the workspace, not more than, ºС |
1250
|
|||
| 4 | Range of automatic temperature control, ºС | 40...1250 | |||
| 5 | Dimensions of working space, length × width × height, mm | 120 × 400 | |||
| 6 | Stability of maintain the temperature at steady thermal conditions, without cages, not worse, ºС | ± 2 | |||
| 7 | Overall dimensions, (diameter × height), no more, mm | 500×750×650 | |||
| 8 | Mechanism of doors lifting | Manual, on the canopy | |||
| 9 | Atmosphere in the workspace | Air | |||
| 10 | Type of temperature regulator / Type of thermocouple | ТРП-08-ТП (1 step) / ТПП | |||
| 11 | Lining of electric furnace | Fibrous materials | |||
| 12 | Material of spiral heater | Wire Х23Ю5Т | |||
High-temperature electric furnace shaft type equipped with an automatic temperature control based on microprocessor controller and solid-state non-contact relay. Furnace chamber is made of a fibrous material. On the hearth placed tiles. Heaters are placed in the grooves on the tube side walls. The cover has a ventilation hole with a cork.
Write a review
Your Name:Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below:
.
. 

