Заполните форму и мы свяжемся с Вами!
Laboratory furnace СНО-4.6.5/4 И1 with fan
|1||Rated power, kW||
|Power supply||220 W, 50 Hz|
|Maximum temperature in the working space, ºС||
|4||Range of automatic temperature control, ºС||40...400|
|5||Dimensions of working space, length × width × height, mm||400 × 600 × 500|
|6||Atmosphere in the working space||Air|
|7||Stability of the temperature control in the steady thermal conditions, without landing, ºС||± 2|
|8||Brand of digital temperature regulator / Thermocouple type||ТРП-08-ТП / ТХК|
|9||Temperature distribution in the workspace in a steady state, without cages, no worse, ºС||± 5|
|10||Availability of shelves and rails, pieces||-|
|11||Door opening mechanism||Manually, on loops|
Laboratory electric furnace СНО-4.6.5/4 И1 with fan, intended for drying and heat treatment of various materials in stationary conditions. The electric furnace equipped with an automatic temperature control based on a solid-state relay and contactless microprocessor temperature controller, which allows to set the temperature, time set temperature and the holding time at this temperature cages. Heaters (heating elements in stainless shell) placed in the slots of the sidewalls and the hearth. The working chamber is made of black metal and covered with heat-resistant paint. Air circulation is performed in a horizontal plane. The oven installed supply and exhaust ventilation openings with shutters.
Write a reviewYour Name:
Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below: