Electric furnace СНО-5.5.5/5 И1
| № | Specifications |
СНО-5.5.5/5 И1
|
|||
|---|---|---|---|---|---|
| 1 | Rated power, kW |
2
|
|||
|
2
|
Power supply | 220 W, 50 Hz | |||
|
3
|
Maximum temperature in the working space, ºС |
500
|
|||
| 4 | Range of automatic temperature control, ºС | 50...500 | |||
| 5 | Dimensions of working space, length × width × height, mm | 500 × 500 × 500 | |||
| 6 | Overall dimensions, length × width × height, no more, mm | 700 × 700 × 700 | |||
| 7 | Atmosphere in the working space | Air | |||
| 8 | Stability of the temperature control in the steady thermal conditions, without landing, ºС | ± 3 | |||
| 9 | Heating elements | Heaters TEHs | |||
| 10 | Execution of the control panel | Built-in | |||
| 11 | Availability of shelves, pieces | 1 | |||
Electric furnace for drying of electrodes СНО-5.5.5/5 И1 with the camera of black steel, covered with heat-resistant paint, and components specified in the table. The electric system is equipped with automatic temperature control on the basis of TRIAC TC-112-16-12 (1 pc), the circuit breaker 1r16A (1 pc) and microprocessor temperature controller ТРП-08-ТР (1 pc), which sets the temperature, time, set the temperature and time of exposure cages at this temperature. Heaters (TEN-s, 4 pieces) are placed in the grooves of the bottom and side walls of the chamber. The furnace lined with modern energy-saving thermal insulation materials.
Write a review
Your Name:Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below:
.
. 

