. .png)
. 
Laboratory oven СНО-6.5.9/4 И2
| № | Specifications |
СНО-6.5.9/4 И2
|
|||
|---|---|---|---|---|---|
| 1 | Rated power, kW |
6 ±1
|
|||
|
2
|
Power supply | 220 W, 50 Hz | |||
|
3
|
Maximum temperature in the working space, ºС |
400
|
|||
| 4 | Range of automatic temperature control, ºС | 50...400 | |||
| 5 | Dimensions of working space, length × width × height, mm | 600 × 500 × 900 | |||
| 6 | Overall dimensions, length × width × height, no more, mm | 800 × 1100 × 1250 | |||
| 7 | Atmosphere in the working space | Air | |||
| 8 | Stability of the temperature control in the steady thermal conditions, without landing, ºС | ± 3 | |||
| 9 | Temperature distribution in the workspace in a steady state, without cages, no worse, ºС | ± 15 | |||
| 10 | Heating elements | Heaters TEHs | |||
| 11 | Brand of digital temperature regulator / Thermocouple type | ТРП-08-ТП / ТХК | |||
| 12 | Design weight, kg | 80 | |||
The laboratory electric furnace СНО-6.5.9/4 И2 without fan is equipped an automatic temperature control on the basis of solid-state relays and contactless microprocessor thermostat sets the temperature, time, set the temperature and time of exposure cages at the same temperature (up to 12 steps "heating - shelf"). There is access to a computer with the provided interface and software for registration of heat treatment processes. To connect an external recorder next to the working thermocouple is a hole Ø11 mm, which can be placed on a thermocouple recorder. Heaters (heating elements in stainless shell) placed in the grooves of the bottom and side walls. The furnace lined with modern energy-saving materials. At the end of the oven with a fan to circulate the air in the chamber in the horizontal plane. There is supply and exhaust (with the flap) the vents. The working chamber is made of stainless steel. The camera has 6 shelves (20 mm rim) of stainless steel. Shelf load up to 10 kg.
Write a review
Your Name:Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below: