. .png)
. 
Carburizing furnace СШЦМ-6.20/10
| № | Specifications |
СШЦМ-6.20/10
|
|||
|---|---|---|---|---|---|
| 1 | Rated power, kW |
74
|
|||
|
2
|
Power supply | 3×380 W, 50 Hz | |||
|
3
|
Maximum temperature in the workspace, not more than, ºС |
1000
|
|||
| 4 | Range of automatic temperature control, ºС | 40...1000 | |||
| 5 | Dimensions of working space, diameter × height, not less, mm | 600 × 2000 | |||
| 6 | The uneven distribution of temperature at the chamber volume, in constant thermal conditions, without cages, ºС | ± 5 | |||
| 7 | Stability of maintain the temperature at steady thermal conditions, without cages, not worse, ºС | ± 3 | |||
| 8 | Type of temperature regulator / Type of thermocouple | ТРП-08-ТП (by default) / ТХА | |||
| 9 | Mechanism of lifting the cover | Actuator | |||
| 10 | Material of spiral heaters | Nichrome | |||
| 11 | Number of heating zones | 2 | |||
Electric furnace cementation СШЦМ-6.20/10. Carburising is carried out in a shaft furnace, comprising a refractory muffle from 20H23N18 material. Carburizator - liquid hydrocarbons (kerosene, etc.). Is possible to conduct gas carburizing. Using triethanolamine liquid nitriding can be carried out. Spending on 1m² cemented surface in average for liquid carburizing 0.1 ... 0.12 l/h (kerosene, syntin, pirobenzol, mineral spirits) and 0.35 ... 0.4 m³/h for gas carburizing.
Electric furnace system is equipped with automatic temperature control on the basis of solid-state relays and contactless microprocessor temperature controllers, which set the temperature, heating rate and spent time on regime.
Furnace lined with modern energy-saving refractory and insulating materials. Cover furnace equipped with a fan and electric rises. In the furnace lid provided with an opening for the control sample.
Write a review
Your Name:Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below: