Furnace with roll-out hearth СДО-17.21.15/1,7 И1 and fan
Electric furnace СДО-17.21.15/1,7 И1 is made under the order and is intended for drying of paints, lacquer coatings in the steady-state conditions with the possibility of programming a multi-stage mode of drying at temperatures up to 170 °C.
№ | Specifications |
СДО-17.21.15/1,7 И1
|
|||
---|---|---|---|---|---|
Material of working chamber: И1 - black metal covered with heat-resistant paint | |||||
1 | Rated power, kW, ± 10% - furnace heaters power - circulating fan power - hood-recovery power - control |
25,2
0,55
0,55
___0,5___
26,8
|
|||
2
|
Power supply | 3×380 V, 50 Hz | |||
3
|
Maximum temperature in the working space, ºС |
170
|
|||
4 | Range of automatic temperature control, ºС | 40…170 | |||
5 | Nominal temperature in the working space of the recovery, °C | 1000 | |||
6 | Type of thermocouples (3 pieces) | THK | |||
7 | Mark of temperature regulator for control Mark of temperature regulator (overheating of the furnace) Mark of temperature regulator for hood-recovery |
TRP-09-TP ТRP-08-TP ТRP-08-ТP |
|||
8 | Dimensions of working space, length × width × height, mm | 1700 × 2100 × 1500 | |||
9 | Overall dimensions, length × width × height, mm |
2400 × 5470 × 2700
|
|||
10 | Stability of temperature control in the steady thermal conditions, without cages, ºС | ± 2 | |||
11 | The uneven distribution of temperature at the chamber volume, in a constant mode, ºС, no more | ± 5 | |||
12 | Number of circulating fans, pieces | 1 | |||
13 | Atmosphere in the workspace | Air | |||
14 | Mechanism of opening doors and rolling out of the hearth | Manual (or electric drive) | |||
15 | Mass of the furnace, kg | 2000 |
Write a review
Your Name:Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below: