Continuous electric furnace СДОП-10.20.17/12,5

High temperature continuous electric furnace СДОП-10.20.17/12,5 with fan and two roll-out podami equipped with automatic temperature control on the basis of solid-state relays and contactless microprocessor temperature control, allows you to set the temperature, time, set the temperature and time of exposure cages at the same temperature. Heaters are placed in the side walls of the chamber and two doors. Electric hearth placed in the end of the track of one of the roll-out decks. The control panel is placed on the left side of the furnace. Modern energy-saving furnace lined with refractory materials. Under the ceiling of the furnace circulation fan is installed with a diffuser of heat-resistant steel to reduce the heterogeneity of the temperature of the furnace chamber. There shall be no oven conductive, corrosive, of carbonaceous gases and solids that can damage the internal components of the oven. In an oven fitted with lids vents (open manually) to remove gas from the furnace discharge potential during the heat treatment of products. In one possible set withdrawable under 10 anchors, each of which are placed on the wire 3 bay. Withdrawable pods turn rolled into the furnace for the heat treatment cages.