Furnace for tempering metal СДО-20.40.15/11
|1||Rated power, kW||
|2||Number of heating zones||3|
|Power supply||3×380 V, 50 Hz|
|Maximum temperature in the working space, °C||
|5||Automatic temperature control range, °C||40…1100|
|6||Dimensions of working space, length × width × height, mm||2000 × 4000 × 1500|
Overall dimensions: width (width without control panel)
length (without external rails)
height (height without lifting mechanism door)
|8||Stability of temperature control in the steady thermal conditions, without cages, °C||± 3|
|9||Mechanisms of moving hearth and lift the door||Electric drives|
|10||Atmosphere in the workspace||Air|
|11||Type of temperature regulator / Thermocouple type||ТРП-08-ТП (by default) / ТХА|
|12||Estimated weight of the furnace, kg||11 400|
High electric furnace СДО-20.40.15/11 with bogie hearth is equipped with automatic temperature control on the basis of solid-state relays and contactless microprocessor-based temperature controllers, allowing to set the temperature, time, set the temperature and time of exposure cages at the same temperature. Installation of thermostats with access to a computer. Heaters (spirals) are located on the tubes in the slots of the side and end walls of the chamber and on the door. Perhaps placing heaters in the hearth. In agreement with the customer the electric parameters can be changed.
The set includes one spare of each type of the heater installed in the furnace, passports and operating instructions in an electric furnace and thermostat. Delivery tray of heat-resistant steel.
Terms of delivery: Time of manufacturing - 45 business days from the date of advance payment - 50%. Acceptance of the finished product in the territory of the Contractor. Shipment - by self after 100% payment. The furnace can be transported by road. Provides warranty (12 months) and post-warranty service.
Write a reviewYour Name:
Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below: