Electric furnaces with protective atmosphere СНЗ-5.5.4/12,5 Гк
Production of industrial furnaces under order from Ukrainian manufacturer Ltd. "Bortek". Specifications and appointment of the electric furnace СНЗ-5.5.4/12,5 Гк, protective atmosphere and the gas-tight housing.
Prices for equipment are available upon request.
Delivery complete set: Electric furnace СНЗ-5.5.4/12,5 Гк, one spare heater of each type, ceramic tube МКРТ of each type, felt, passports and operating instructions on electric furnace, temperature regulator and thermocouple. Delivery of the weld heat-resistant steel pallet of 220Х23Н18, 10 mm thick, with ribs and thermo-compensation cuts.
Delivery conditions: Production time 30 working days after the prepayment of 50%. Acceptance of the finished electric furnace passes on the territory of the Customer. Shipping: by shipping company or by self after 100% payment. Delivery options more fully discussed with the Customer from the moment of payment, depending on the availability of transport, etc. Ltd. "Bortek" provides loading and customs clearance for export. If necessary, we carry out supervision of equipment, commissioning and training of personnel on the Customer's territory. Provides warranty (12 months) and post-warranty service. We provide technical support, supply of components, upgrade and update of technical characteristics of equipment, as well as major repairs.
|Гк – the gas-tight housing|
|1||Rated power, kW||
|Power supply||3×380 V, 50 Hz|
|Maximum temperature in the working space, ºС||
|4||Range of automatic temperature control, ºС||40...1250|
|5||Stability of temperature control in the steady thermal conditions, without cages, ºС||± 3|
|6||Thermoregulator / Thermocouple||ТРП-08-ТП (by default) / ТПП|
|7||Atmosphere in the working space||Protective gas atmosphere / Air|
|8||Dimensions of working space, length × width × height, mm||500 × 500 × 400|
|9||Overall dimensions, length×width×height, mm||1650 × 1700 × 1800|
|11||Welded tray of heat resisting steel, 10 mm thick with ribs and thermo-compensation cuts||by agreement with the Customer|
|12||The presence of the fan||absent by agreement with the Customer|
Furnace settings can be changed in consultation with the Customer.
|Double doors tightly close the furnace working chamber. Easily rotate around its axis for convenient use and loading of workpiece.|
Technical description: The electric furnace СНЗ-5.5.4/12,5 Гк is designed for carrying out various types of heat treatment without the presence of a decarburized layer, during heating for annealing, normalization, quenching or tempering, under stationary conditions. The furnace has a gas-tight housing, a connection for the input and output of a shielding gas (nitrogen or argon), a gauge for monitoring the value of the excess gas pressure in the furnace (5 ÷ 20 mm of water). The sealing of the furnace ensures a low expenditure of working gases. The furnace is equipped with an automatic temperature control system based on solid-state proximity relays and a microprocessor-based temperature controller, and sets the temperature, the time to enter the mode and the time it takes to operate. In the thermoregulator there is an output to the computer with the help of the interface and software, which are attached. In the electric furnace there is a safety automaton, which works in case of overheating of the furnace or its electronic components, switches off the heaters when the doors are opened. The furnace is lined with modern energy-saving fibrous, microporous, fire-resistant and heat-insulating materials. This provides a quick exit to a given temperature regime and minimizes electricity consumption. Heaters (spirals of super-felts) are installed on the tubes in the niches of the side and end walls of the furnace and into the bottom. The ends of the tubes are fixed in the grooves of special brackets made of refractory ceramics and ensure reliable operation and easy replacement of heaters, if necessary. The floor heaters are covered with ceramic tiles. The furnace can be transported by road.
|Acceptance of the finished product is carried out on the territory of the Contractor.
All equipment is completely manufactured and individually inspected at our company Bortek Ltd.
|Shipment after 100% payment. Bortek Ltd. provides loading and customs clearance of cargo for export.
Warranty (12 months from the date of shipment) and post-warranty service are provided.
|СНЗЛ – 1,6.2,5.1/11 И2 Гк (laboratory) СНЗ – 3.6.2/12,5 Гк СНЗ – 6.8.4/12,5 Гк with fan СШЗ – 10.25/12,5 Гк|
Please send your technical specifications on e-mail:
Get advice and find out the prices of equipment you can by phone:
+38 (050) 462-8219
+38 (04595) 7-12-16
Pushkaruk Natalia Vladimirovna
Write a reviewYour Name:
Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below: