ОТПРАВИТЬ ЗАПРОС

Заполните форму и мы свяжемся с Вами!

Enter last 2 characters of word “machine”
Close
Electric furnace with protective atmosphere СНЗ-5.5.5/12 И2 Гк
Electric furnace with protective atmosphere СНЗ-5.5.5/12 И2 Гк
?

Бренд, торговая марка или название предприятия-производителя, под знаком которого изготовлен товар. «Собственное производство» означает, что товар изготовлен продавцом либо не сертифицирован.

BrandBortek
?

Наличие гарантийных обязательств производителем, подтверждает отсутствие в изделии дефектов и принимает на себя обязатель­ства по обеспечению бесплатного ремонта и замены вышедших из строя элементов, без вины пользователя, на протяжении всего срока гарантии. В результате невозможности ремонта изделия, полная его замена без потери технических характеристик.

Product Code: 12
?

Маркировка — нанесение условных знаков, букв, цифр, графических знаков или надписей на объект, с целью его дальнейшей идентификации (узнавания), указания его свойств и характеристик.

Brand: СНЗ
?

Страна в которой находится производство продукции.

Country of origin: Ukraine

Electric furnace with protective atmosphere СНЗ-5.5.5/12 И2 Гк

Specifications
СНЗ-5.5.5/12 И2 Гк 
1 Rated power, kW
26 ±5
2
Power supply 3×380 V, 50 Hz
3
Maximum temperature in the working space, ºС
1200
4 Range of automatic temperature control, ºС 40...1200
5 Dimensions of working space, length × width × height, mm 500 × 500 × 500
6 The uneven temperature distribution into the furnace chamber in the steady thermal conditions, without cages, ºС ± 5
7 Stability of maintain the temperature at steady thermal conditions, without cages, °C, not less than ± 3
8 Type of temperature regulator / Thermocouple type  ТРП-08-ТП (by default) / ТПП
9 Material of spiral heaters Х23Ю5Т
10 Lining of the camera Fibrous plates
11 Lining of hearth Fireclay bricks


Electric furnace СНЗ-5.5.5/12 И2 Гк with protective atmosphere is gas-tight housing equipped with automatic temperature control on the basis of microprocessor controller and solid-state non-contact relay. The side walls of the furnace have two nozzles (3/4 ') for inputting an inert gas to the furnace and the gas outlet from the furnace for tapped gauges. Protective atmosphere is created in the furnace by replacing air with an inert gas.
The furnace lined with modern energy-saving materials. Furnace slight overpressure is created (5-20 mm of water.). In order to prevent air leaks. Heaters are placed in the side and end walls of the chamber and the hearth. Conclusions derived heaters on the outer wall. The furnace is equipped with manometers.

 

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below:



ТОВ "Бортек" © 2026