ОТПРАВИТЬ ЗАПРОС

Заполните форму и мы свяжемся с Вами!

Enter last 3 characters of word “machine”
Close
Pit furnaces for carburizing СШЦМ-6.10/10 Pit furnaces for carburizing СШЦМ-6.10/10 Pit furnaces for carburizing СШЦМ-6.10/10 Pit furnaces for carburizing СШЦМ-6.10/10
Pit furnaces for carburizing СШЦМ-6.10/10
?

Бренд, торговая марка или название предприятия-производителя, под знаком которого изготовлен товар. «Собственное производство» означает, что товар изготовлен продавцом либо не сертифицирован.

BrandBortek
?

Наличие гарантийных обязательств производителем, подтверждает отсутствие в изделии дефектов и принимает на себя обязатель­ства по обеспечению бесплатного ремонта и замены вышедших из строя элементов, без вины пользователя, на протяжении всего срока гарантии. В результате невозможности ремонта изделия, полная его замена без потери технических характеристик.

Product Code: 12
?

Маркировка — нанесение условных знаков, букв, цифр, графических знаков или надписей на объект, с целью его дальнейшей идентификации (узнавания), указания его свойств и характеристик.

Brand: СШЦМ
?

Страна в которой находится производство продукции.

Country of origin: Ukraine

Pit furnaces for carburizing СШЦМ-6.10/10

Specifications
СШЦМ-6.10/10   
1 Rated power, kW
40 ±5
2
Power supply 3×380 W, 50 Hz
3
Maximum temperature in the workspace, not more than, ºС
1000
4 Range of automatic temperature control, ºС 40...1000
5 Dimensions of working space, diameter × height, not less, mm 600 × 1000
6 Overall dimensions, (diameter × height), no more, mm 1800 × 3000
7 Stability of maintain the temperature at steady thermal conditions, without cages, not worse, ºС ± 3
8 Type of temperature regulator / Type of thermocouple ТРП-08-ТП (by default) / ТХА
9 Mechanism of lifting the cover Actuator
10 Material of spiral heaters Nichrome
11 Number of heating zones 1


The electric furnace system is equipped with automatic temperature control on the basis of solid-state relays and contactless microprocessor-based controller with a given temperature, time to treatment and time spent on the operation. Control remote, outdoor, cable loop 5 m. The cover of the furnace circulation fan installed. Cover electric rises and is discharged in the direction of the rotary arm. Excessive pressure measured by manometers. The furnace is lined with modern energy-saving refractory and insulating materials. Heaters are installed in the slots of the side walls of the furnace. Carburizing is produced in a shaft furnace comprising a muffle of refractory steel. Karbjurizator - liquid hydrocarbon (kerosene) or natural gas. After loading the articles, the muffle fed carburizer, the exhaust gas is discharged into the upper part of the muffle through valve discharge (spark) and is discharged into the atmosphere. Before and after the carburization process muffle is purged with inert gas. Consumption carburizers 1 m² cemented surface in serednem sotavlyaet 0.35 ... 0.4 m³ / h for gas and 0.1 ... 0.12 l / h liquid (kerosene, syntin, pirobenzol, triethanolamine, white spirit).

The package includes the furnace passport and operating instructions in an electric furnace and thermostat, and one spare heating element. An additional supply: baskets to load the products (to be discussed under the specific details of construction); gas strut to regulate the flow of gases; carbon potential control system.

Photo 1. The electric furnace SShCM-6.10/10. On the photo indicated: 1.Korpus electric. 2. Shopping Cart 3. Hoist the cover. 4. The cover of the furnace. 5. Remote control the operation of the furnace. 6. Gas station.

How to assemble the furnace. Baskets (item 2) are used to load small parts in the oven and set the oven into the housing (item 1) Hoist the cover (item 3) is connected to the body of the furnace by means of detachable veil, welded to the body of the oven and cover the mechanism of rise. The furnace cover (item 4) mounted on the furnace body and pressed against screw connection to the housing of the furnace and connected to the lid lifting mechanism by means of cables (3 pcs.) And the two guide struts.

Remote control (item 5) supplies power to the heaters are placed in the oven, on the electric hoist the cover and the fan drive on the cover, for which the cable from the control panel are connected to the lifting mechanism on the cover. Also, power is supplied to the devices placed on the gas counter (item 6). Devices are used to control the composition of the protective gas in the furnace by means of the sensor and the solenoid, available as part of the furnace. Shielding gases from the gas strut via piping attached to the cover lifting mechanism, are fed to the furnace.

 

 

 

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below:



ТОВ "Бортек" © 2022