Chamber electric furnace СНО-3,5.8.3,5/11
Delivery complete set: Chamber electric furnace СНО-3,5.8.3,5/11 with horizontal loading; Spare heaters and ceramic tubes МКР of each type installed in the furnace; Passports and operating instructions for the furnace and thermoregulator. In addition, it is specified: the delivery of a welded tray of heat-resistant steel, 10 mm thick, with stiffening ribs and thermocompensation cuts; Delivery of a loading table on wheels; Furnishing the furnace with vibration damping supports.
Prices are available upon request.
Delivery conditions: Production time 30 working days after the prepayment of 50%. Acceptance of the finished electric furnace passes on the territory of the Customer.
Shipping: by shipping company or by self after 100% payment. Delivery options more fully discussed with the Customer from the moment of payment, depending on the availability of transport, etc. Ltd. "Bortek" provides loading and customs clearance for export. If necessary, we carry out supervision of equipment, commissioning and training of personnel on the Customer's territory.
Provides warranty (12 months) and post-warranty service. We provide technical support, supply of components, upgrade and update of technical characteristics of equipment, as well as major repairs.
|1||Rated power, kW||24||Welded tray of heat resisting steel
Spare heaters and ceramic tubes МКР
|Power supply||3×380 V, 50 Hz|
|Maximum temperature in the working space, ºС||1100|
|4||Range of automatic temperature control, ºС||40...1100|
|5||Stability of temperature control in the steady thermal conditions, without cages, ºС||± 3|
|6||Thermoregulator / Thermocouple||ТРП-08-ТП (by default) / ТХА|
|7||Atmosphere in the working space||Air|
|8||Dimensions of working space, width × length × height, mm||350 × 800 × 350|
|9||Overall dimensions, width × length × height, mm||1320 × 1625 × 1590|
|11||The presence of the fan (to blow out the cage and organize the movement of the atmosphere in the furnace's working chamber)||by agreement with the Customer|
Furnace settings can be changed in consultation with the Customer.
Technical description: Industrial electric furnace СНО-3,5.8.3,5/11 it is intended for heat treatment of various materials in stationary conditions. The electric furnace is equipped with an automatic temperature control system based on solid-state contactless relays and a microprocessor-based temperature controller, which sets the temperature, the time to enter the mode and the time it takes to operate (up to 12 steps "heating-shelf"). The thermoregulator can have an output to a computer (interface and software are provided) for visualization and archiving of processes, as well as controlling the operation of the furnace from a computer. In the furnace there is a safety automatics, triggered in case of overheating of the furnace or its electronic units, switches off the heaters when the doors are opened. Control panel is located on the left side of the furnace. Heaters are placed on the tubes in the niches of the side and end walls of the furnace and into the. Bottom heaters are covered with ceramic tiles. Lining furnace is made of modern energy-saving materials with low heat capacity and thermal conductivity. The furnace body mounted air extraction and ventilation holes with plugs for removing, if necessary, possible gas discharge. Doors on curtains open manually from the left to the right. A tight fit of the doors to the furnace body is ensured.
The oven can be transported by road.
|СНО – 4.8.3/12,5 СНО – 6.8.5/13 СНО – 8.16.5/11 СНО – 9.12.6/11|
Please send your technical specifications on e-mail:
Get advice and find out the prices of equipment you can by phone:
+38 (050) 462-8219
+38 (04595) 7-12-16
Pushkaruk Natalia Vladimirovna
Write a reviewYour Name:
Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below: