Electric drying oven СНО-2.5.2/4 И1
Delivery complete set: Electric furnace СНО-2.5.2/4 И1, one spare heater of each type, passports and operating instructions on electric furnace, temperature regulator and thermocouple. Delivery of the weld heat-resistant steel pallet of 220Х23Н18, 10 mm thick, with ribs and thermo-compensation cuts.
Delivery conditions: Production time 15 working days after the prepayment of 50%. Acceptance of the finished electric furnace passes on the territory of the Customer.
Shipping: by shipping company or by self after 100% payment. Delivery options more fully discussed with the Customer from the moment of payment, depending on the availability of transport, etc. Ltd. "Bortek" provides loading and customs clearance for export. If necessary, we carry out supervision of equipment, commissioning and training of personnel on the Customer's territory.
Provides warranty (12 months) and post-warranty service. We provide technical support, supply of components, upgrade and update of technical characteristics of equipment, as well as major repairs.
Prices for equipment are available upon request.
|1||Rated power, kW||
|Power supply||220 V, 50 Hz|
|Maximum temperature in the working space, ºС||
|4||Range of automatic temperature control, ºС||40...400|
|5||Stability of temperature control in the steady thermal conditions, without cages, ºС||± 5|
|6||Thermoregulator / Thermocouple||ТРП-08-ТП (by default) / ТХА|
|7||Atmosphere in the working space||Air|
|8||Dimensions of working space, length × width × height, mm||200 × 500 × 200|
|9||Overall dimensions, length×width×height, mm||370 × 680 × 500|
|11||The presence of the fan||by agreement with the Customer|
Furnace settings can be changed in consultation with the Customer.
Technical description: The electric laboratory oven СНО-2.5.2/4 И1 is designed for drying and calcining various materials under stationary conditions. In the furnace there is a supply (in the door) and exhaust (in the ceiling of the furnace) ventilation holes with stoppers to remove possible gas emissions, during heat treatment, and to accelerate the cooling of the furnace (if necessary). The furnace is equipped with an automatic temperature control system based on solid-state proximity relays and a microprocessor-based temperature controller, which determines the temperature, the time to enter the mode and the time it takes to operate. It is possible to install the thermostat with the output to the computer with the provided interface and software. In the electric furnace there is a safety automaton, which works in case of overheating of the furnace or its electronic units, switches off the heaters when the doors are opened. The furnace is lined with modern energy-saving fibrous, microporous, fireproof and heat-insulating materials.This provides a quick exit to a given temperature regime and minimizes electricity consumption. Heaters (heaters in a stainless shell) are installed in the recesses of the side walls of the furnace. To reduce the temperature gradient on the chamber chamber volume, it is possible to install a circulating fan that will ensure a uniform temperature distribution and air circulation in the vertical plane of the chamber (if the customer wishes, it is possible to circulate the furnace atmosphere in a horizontal plane).
|СНО – 3,5.3,5.3,5/3,5 И1 with fan СНО – 3,9.3,8.3,9/5 И2 with fan СНО – 4,1.4.4,1/3,5 И1 СНО – 5.5.3/4 И1|
Please send your technical specifications on e-mail:
Get advice and find out the prices of equipment you can by phone:
+38 (050) 462-8219
+38 (04595) 7-12-16
Pushkaruk Natalia Vladimirovna
Write a reviewYour Name:
Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below: