Chambers electric furnace СНО-6.12.4/11
Delivery complete set: Electric furnace СНО-6.12.4/11, one spare heater of each type, ceramic tube МКРТ of each type, felt, passports and operating instructions on electric furnace and temperature regulator. Delivery of the weld heat-resistant steel pallet of 220Х23Н18, 10 mm thick, with ribs and thermo-compensation cuts.
Prices for equipment are available upon request.
Delivery conditions: Production time 30 working days after the prepayment of 50%. Acceptance of the finished electric furnace passes on the territory of the Customer. Shipping: by shipping company or by self after 100% payment. Delivery options more fully discussed with the Customer from the moment of payment, depending on the availability of transport, etc. Ltd. "Bortek" provides loading and customs clearance for export. If necessary, we carry out supervision of equipment, commissioning and training of personnel on the Customer's territory. Provides warranty (12 months) and post-warranty service. We provide technical support, supply of components, upgrade and update of technical characteristics of equipment, as well as major repairs.
|1||Rated power, kW||
|Power supply||3×380 V, 50 Hz|
|Maximum temperature in the working space, ºС||
|4||Range of automatic temperature control, ºС||40...1100|
|5||Stability of temperature control in the steady thermal conditions, without cages, ºС||± 3|
|6||Thermoregulator / Thermocouple||ТРП-08-ТП (by default) / ТХА|
|7||Atmosphere in the working space||Air|
|8||Dimensions of working space, length × width × height, mm||600 × 1200 × 400|
|9||Overall dimensions, length×width×height, mm||1600 × 2100 × 1600|
|11||Welded tray of heat resisting steel, 10 mm thick with ribs and thermo-compensation cuts||by agreement with the Customer|
|12||The presence of the fan||by agreement with the Customer|
Furnace settings can be changed in consultation with the Customer.
Technical description: The electric furnace СНО-6.12.4/11 is intended for carrying out various types of heat treatment (annealing, calcining, normalizing, hardening, tempering, etc.) under stationary conditions. In the furnace there are air supply and exhaust vents with stoppers to remove possible gas emissions, during heat treatment, and to accelerate the cooling of the furnace (if necessary). The furnace is equipped with an automatic temperature control system based on solid-state proximity relays and a microprocessor-based temperature controller, which determines the temperature, the time to enter the mode and the time it takes to operate. In the thermoregulator, there is an output to the computer using the interface and software that are included. In the electric furnace there is a safety automaton, which works in case of overheating of the furnace or its electronic units, switches off the heaters when the doors are opened. The furnace is lined with modern energy-saving fibrous, microporous, fireproof and heat-insulating materials. This provides a quick exit to a given temperature regime and minimizes electricity consumption. Heaters (spirals from superfrehly) are installed on the tubes in the niches of the side and end walls of the furnace and into the bottom. The ends of the tubes are fixed in the grooves of special brackets made of refractory ceramics and ensure reliable operation and easy replacement of heaters, if necessary. The floor heaters are covered with ceramic tiles. The oven can be transported by road.
|СНО – 3,5.5.3,5/11 СНО – 5.8.3/11 СНО – 6.12.4/12,5 СНО – 7.15.5/11 СНО – 9.12.6/10|
Please send your technical specifications on e-mail:
Get advice and find out the prices of equipment you can by phone:
+38 (050) 462-8219
+38 (04595) 7-12-16
Pushkaruk Natalia Vladimirovna
Write a reviewYour Name:
Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below: