Electric furnace СДО-10,2.15.15/5,5 И2 with bogie hearth and fan
Delivery complete set: Electric bogie-hearth furnaces СДО-10,2.15.15/5,5 И2 with fan; Spare heater; Passports and operating instructions for the electric oven and thermoregulator. You can install a fan to blow out the cage and organize the movement of the atmosphere in the furnace's working chamber.
Prices are available upon request.
Delivery conditions: Production time 30 working days after the prepayment of 50%. Acceptance of the finished electric furnace passes on the territory of the Customer.
Shipping: by shipping company or by self after 100% payment. Delivery options more fully discussed with the Customer from the moment of payment, depending on the availability of transport, etc. Ltd. "Bortek" provides loading and customs clearance for export. If necessary, we carry out supervision of equipment, commissioning and training of personnel on the Customer's territory.
Provides warranty (12 months) and post-warranty service. We provide technical support, supply of components, upgrade and update of technical characteristics of equipment, as well as major repairs.
|№||Specifications||СДО-10,2.15.15/5,5 И2 with fan|
|И2 – working chamber of the furnace is made of stainless steel|
|1||Rated power, kW||38||
|Power supply||3×380 V, 50 Hz|
|Maximum temperature in the working space, ºС||550|
|4||Range of automatic temperature control, ºС||40...550|
|5||Stability of temperature control in the steady thermal conditions, without cages, ºС||± 3|
|6||Thermoregulator / Thermocouple||ТРП-08-ТП (by default) / ТХК|
|7||Atmosphere in the working space||Air|
|8||Dimensions of working space, width × length × height, mm||1020 × 1500 × 1500|
|9||Overall dimensions, width × length × height, mm||1800 × 4860 × 2590|
|10||Mechanism of bogie-hearth||Manual|
|12||The presence of the fan||by agreement with the Customer|
Furnace settings can be changed in consultation with the Customer.
Technical description: Industrial electric furnace СДО-10,2.15.15/5,5 И2 with fan is designed for low-temperature processing of various materials and products. The working chamber of the furnace is made of stainless steel. Heaters (heaters in a stainless shell) are located in the niches of the side walls. In the furnace, there are supply and exhaust (with a damper) ventilation holes for removing gas emissions, during heat treatment, and to accelerate the cooling of the furnace (if necessary). The electric furnace is equipped with an automatic temperature control system based on solid-state proximity relays and a microprocessor-based temperature regulator, which allows you to set the temperature, the temperature set time and the holding time of the charge at the specified temperature. It is possible to install a thermoregulator with an output to a computer for archiving the heat treatment processes. The control cabinet is placed on the side of the furnace. In the electric furnace there is a safety automaton, which works in case of overheating of the furnace or its electronic units, switches off the heaters when the doors are opened. In the furnace there is a fan, which provides air circulation in the vertical plane. It is possible to produce a furnace with air circulation in the horizontal plane. Doors on curtains open manually from left to right. The impeller and fan shaft, internal walls of the chamber, its frame and ducts are made of heat-resistant steel 08X18N10.
The oven can be transported by road.
|СДО – 10.13.10/4,5 И1 with fan СДО – 17.21.15/1,7 И1 with fan СДО – 10.30.5/1 И2 with fan СДО – 30.78.17/5 И1 with fan|
Please send your technical specifications on e-mail:
Get advice and find out the prices of equipment you can by phone:
+38 (050) 462-8219
+38 (04595) 7-12-16
Pushkaruk Natalia Vladimirovna
Write a reviewYour Name:
Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below: